Home > Products > Guitar >




Base Price :

$195 USD

No ORDER Form on this site. Please place your order on the mobile site :





P.A.F Astound ..... bouncy cleans & dirty GROWL with 3D sound / 8.7k


 


 



 

This demo starts at the end where Dave wraps up his conclusions so go back
                              to the beginning to hear the pickup


Un-balanced coils but not un-balanced hum = Zero-Hum.  All unbalanced coils in humbuckers produce some hum, but not Kinman's.

P.A.F Astound v2 with optional ESSC

The P.A.F Astound v2 is a high energy version of the P.A.F Plus with an overdose of drive and dirty but defined growl for the bridge position.  Awesome dynamic range and exceptional touch sensitivity adds a 3rd dimension to the sound that effortlessly cuts through the band.  Better dynamic response and is very responsive to pinch harmonics and hammer-ons which makes it a must for shredders as well as rock and heavy rock -and- metal.  It growls under gain on the wound strings and sings sweetly on the plain strings with an intense harmonic bloom which is as smooth as silk .... with a bitey edge that's not razor sharp and offensive.

We set out to make every Kinman deliver the maximum amount of expression dynamics to our customers.  Our high energy model, the P.A.F Astound v2 delivers significantly higher output and extra drive using a highly efficient Patented magnetic circuit that collects wasted magnetism and directs it to the strings and coils where it is used to generate additional output and dynamics.  Thus you get louder volume and increased dynamics at the same time which is the opposite of normal high output pickups which choke themselves on excess coil capacitance that comes with over-wound coils.

Recommend solely for the bridge position paired with a P.A.F Plus v2 or 59+ LPS in the neck

  • High Expression factor
  • Amazing split single coil sound with ESSC
  • Totally immune to microphonic screech.
  • Absolutely Zero-Hum (more silent than regular humbuckers)

v2 Upgrade 1-Apr-2020.  We recently revisited our bridge humbuckers and wondered if there was a way to make them a little bit louder and soften the razor sharp trebles.  We accomplished both and the result is the v2 variant.  However there is an additional benefit, the E-6th string took on a springy and more lively bouncy sound.  You can actually feel the bounce under your finger tips.  It will inspire your creative side by making you want to play in different ways that will surprise and delight you.  Read the full story in our Blog article.

Optional ESSC upgrade 4-May-2021  Now can be ordered with optional ESSC - Enhanced Split Single Coil where the split single coil is loud and convincingly Fender-like as a single coil should be, instead of the weak facsimile of a split regular humbucker.  Requires a double pole double throw switch that we can supply as a Push/Push pot or a mini-toggle switch with an up-charge.  Click the options in the order channel.

Our Humbuckers cancel hum better than any other humbucker but there is another type of noise called 'buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars)

Patent number 8,791,351 and Patent Applied for

Number of parts in this pickup: 29
Number of parts in similar pickup: 22


Technical & Application info:


 

 
  The Baseplate is Laser engraved with all Identity info


The bridge pickup in the P.A.F Suite.  Weapon of choice for Tone connoisseurs.

Direct replacement for conventional humbuckers such as Gibson, Duncan etc.  Some guitars (a few Ibanez, some Fender Strat and one or two others) have pickups with excessively rounded corners.  If a pickguard is fitted (for example Fender Strat Deluxe) a small modification to the pickguard opening to accommodate a Kinman humbucker is well worth the effort since Kinman's sound so much better.  The cavity in the body is suitable as it is.

NEWS Flash 15-Dec-2020 - Now available with 47.5mm pole spread that suits the neck position prefectly on Gibson's and and other guitars that have a narrow 52mm spaced bridge.  This has been made possible with our CLCT (Coil Length Compensation Technology) that restores the performance that is lost when poles are spaced closer together.

Hook-up cable

  • Standard is 2 conductor shielded
  • Not recommended but can be split so 3 conductor hook-up cable is optional upon request. See Converge-3 ultimate splitting models.
  • Phase reversing can also be done with 3 conductor hook-up cable.
  • Not recommended but 4 conductor cabling for Series, Parallel and Coil Splitting upon request at additional cost.
  • Neck 380mm / 15" long -and- Bridge 150mm /6" long for bridge.

Connection means available

  • Bare wire ends for soldering.
  • Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.- including the 2 pickup KHP-90 harness for Gibson style guitars.
  • Gibson 2 wire and 5 wire Quick Connect plug for Gibson harness.

Output Polarity: 

  • in-phase with Gibson and Copy humbuckers
  • in-phase with all other Kinman pickups
  • opposite phase to Fender Strat
  • ESSC versions can not be phase reversed and must be specially ordered as such.

Pot & Capacitor values

  • Best with 500k Ohm for Volume & Tone.  Many Gibson's have 300k and that works fine too as does 250k.
  • Normal tone cap value of 0.022µF in 63 ~ 100 volt Polyester.  Smaller value lessen the severity of Treble cut, higher values increase it.

Pole spreads

that provide optimum string-over-pole alignment.  Our Ordering System automatically allocates the correct pole spacing according to the bridge spacing you indicate.

  • where the bridge saddle spacing is a standard Gibson 52mm (or less than 54mm for some other brands).
    • 47.5mm for neck position
    • 50mm for bridge position
  • where the bridge saddle spacing on a Stratocaster is 56.4mm (vintage 6 point bridge)
    • 50mm for neck position
    • 53mm for bridge position

Mounting options

  • conventional 2 screw mounting,
  • also available with 3 screw mounting (you specify the distance between the two top screws)

Covers and colors

  • Open top Natural Nickel-Silver, highly recommended and have zero impact on sonic performance
  • Closed top Natural Nickel-Silver, have low impact on sonic performance 
  • Electro real Gold plating on closed top covers does impact on treble frequencies.
  • Various colored top plates are available for open top covers (Black, Cream, White and 6 different Pearloid colors) with clear, scratch resistant protector plate.
  • Kinman humbuckers are engineered differently without molded butyrate plastic bobbins.  Removing covers will not reveal bobbins and we advise against it.